The tft lcd module manufacturer tells you that in the actual process, sometimes it is not necessary to follow the principle of LCD liquid crystal module. The structure is to distinguish its category, more is to distinguish it from certain angles of product, display mode and display performance. The tft lcd module manufacturer tells you that this classification of LCD liquid crystal modules is more practical in applications.

1. LCD liquid crystal module product form
Liquid crystal display device: The manufacturer of tft lcd module tells you that some liquid crystal display devices include two polarizers at the front and rear, which are called LCDs.
Liquid crystal display module: The product including the assembled circuit board, IC drive control circuit and other accessories is referred to as LCM for short.
2. LCD liquid crystal module display mode
Front image display: The tft lcd module manufacturer tells you the products that display dark content on a light background.
Negative image display: The tft lcd module manufacturer tells you a product that displays light content on a dark background.
Transmissive display: A product in which the light source of the backlight passes through the device so that an observer viewing it from the front can see it.
Reflective display: a product where the observer and external light source are on one side of the device.
Semi-transmissive display: The manufacturer of the tft lcd module tells you that the backlight reflective film of this type of product is equipped with a mesh, which can completely transmit 30% of the backlight, so it can be used as a reflective display during the day or as a transparent display for excessive display .
The tft lcd module manufacturer tells you that the LCD LCD module factory will appropriately increase the antistatic dose of the LCD LCD module screen according to the needs of customers, but the antistatic agent will increase the current consumption of the LCD LCD module screen. The tft lcd module manufacturer tells you that you need to make appropriate adjustments according to the customer's module drive current. Generally, it is not recommended to add it.