Do you know the three connection methods of LCD liquid crystal display? The following 2.4 inch tft lcd manufacturers will take you to learn more about it.

1. Conductive tape connection
The 2.4 inch tft lcd manufacturer tells you that you need to use a structural piece to fix the LCD, the conductive adhesive strip and the PCB board when using this connection method. The 2.4 inch tft lcd manufacturer tells you that because the electrode spacing can be made small, it is suitable for driving Many products.
2. Metal pin connection
The manufacturer of 2.4 inch tft lcd tells you to fix the metal pins on the outer leads of the LCD. You can either directly fix the LCD on the PCB or plug the LCD into the socket of the PCB. The 2.4 inch tft lcd manufacturer tells you that the pitch of the metal pins is 2.54 mm, 2.0mm, 1.8mm, applicable glass thicknesses are 1.1mm, 0.7mm, 0.55mm.
3. Hot-pressed soft belt connection
The 2.4 inch tft lcd manufacturer tells you to use a soft tape to connect the LCD and the PCB board. Since the base is soft, it is convenient to fix it in use and can reduce the installation thickness.