1. The graphic lcd module manufacturer tells you that first of all, dust will be adsorbed on the surface of the LCD screen, which will make the display of the LCD screen blurred and affect people's viewing experience. The graphic lcd module manufacturer tells you that in this case, you should use professional screen cleaning fluid and soft cloth LCD screen to wipe the dust adsorbed on the filter to prevent dust from entering the filter and affecting the internal hardware facilities.

Secondly, dust will enter the inside of the LCD screen and affect the speed of the internal color wheel. Understand the LCD screen. As we all know, the color wheel is a very important part of the LCD screen. The graphic lcd module manufacturer tells you that its running speed is also very high. If a large amount of dust is absorbed in the screen, it will be difficult for the color wheel to run at a high speed, which will cause the LCD screen to not work properly.
2. The graphic lcd module manufacturer tells you that if dust enters the LCD screen, it will also affect the display brightness of the splicing screen. Over time, the brightness of the display screen will gradually decrease, failing to achieve the expected display effect, which will bring losses to the enterprise and greatly affect the service life of the LCD splicing screen.
3. The graphic lcd module manufacturer tells you that if dust enters the LCD screen, if internal treatment is required, it must be disassembled by a professional to reduce damage to the product itself.
The graphic lcd module manufacturer tells you that the assembly of the LCD module is simple and easy to ensure that the operator accurately grasps the assembly information, reduces operating deviations, and reduces the incidence of defects caused by assembly. In the process of structural design, it is necessary to ensure that there are at least two positions in one direction to fix the components and stabilize the product state. For example, when fixing the bottom plate, the design buckle should be butted with the concave and convex parts. The graphic lcd module manufacturer tells you that the possibility of reverse installation should be avoided in structure, and the top, bottom, left and right symmetrical should be avoided as much as possible, and the appearance design should be as different as possible. The structural design of the LCD module should also ensure that the operator can easily identify the front and back of the component as soon as the operator sees the component. You can specify the attachment position of the barcode and label by marking, and the assembly of a part should be completed in one operation mode as much as possible. When assembling parts, it is more complicated to hold the parts while fixing them.
The graphic lcd module manufacturer tells you that dust has such a big impact on the LCD screen, so the manufacturer must do a good job of prevention during the production and manufacturing process to lay a good foundation for future use. The graphic lcd module manufacturer tells you that you should also pay attention to whether there is dust absorption on the surface of the product and whether the dust enters the product, and deal with it in time.